Information About The Guarantee - JANE nurse Guard Manual Del Usuario

GUARD
GB
1 USE VEHICLE 3-POINT BELT+LSOFIX ATTACHMENT
When installing the seat in the front vehicle seat make sure the backrest of the vehicle seat is in an upright
position.
Position the seat inside the vehicle. Squeeze and pull the ISOFIX
release buttons to release the ISOFIX attachments. (fig.2) The ISOFIX attachments lock only in the position
where it is totally extended.
Click the ISOFIX attachments to the ISOFIX anchorage points in the vehicle seat (fig.3). Make sure that all
ISOFIX indicators are GREEN, (fig.4) Push the seat as far as possible towards the backrest of the vehicle seat.
Slide the shoulder belt in the shoulder belt guide, (fig.5) Make sure the belt is not twisted.
USE VEHICLE 3-POINT BELT ONLY
2
If the seat cannot be used in combination with ISOFIX anchorage points in the vehicle seat, the ISOFIX
attachments can be stowed inside the seat and the seat can be used in combination with the 3-point belt only.
Position the seat inside the vehicle. Slide the shoulder belt in the shoulder belt guide, (fig.5) Make sure the belt
is not twisted.
POSITIONING OF THE CHILD
3
Adjust the headrest to the correct height by squeezing the Height adjuster, (fig.6) The headrest must be
adjusted that there is a space one finger wide between the headrest and your child's shoulders.(fig.7)
The seat has two positions. For reclined position Sliding out the reclining Handle at the bottom of the base, in
this position might not fit in all vehicles. Position the seat in the correct position before positioning the child
with the vehicle belt, (fig.8)
Position the vehicle belt in front of the child and lock the belt into the buckle of the vehicle.(fig.9)
REMOVING THE SEAT
4
Remove the shoulder belt out of the shoulder belt (fig. 10)
Squeeze the ISOFIX release button to release and pull back the
ISOFIX attachments. (fig. 11 )
Remove the seat from the vehicle.
REMOVING AND REFITTING THE COVER
5
Do take care when you remove the cover, as re-fitting the cover is the reverse process.
Start to take off the backrest part first and re-fit the backrest part as the last part.
For washing instructions, see the wash care label at the inside of the fabric cover.
MAINTENANCE
6
The cover can be machine washed using mild detergent and at a maximum temperature of 30ºC Please see the
washing instructions on the care label of the cover.
Do not tumble dry as this could cause the padding to come away from the fabric.
Do not expose the upholstery to sunlight for prolonged periods, when the seat is not in use cover it up or store
it in the vehicle boot.
The plastic parts can be cleaned with a damp cloth and neutral detergent.

INFORMATION ABOUT THE GUARANTEE

7
- This item is guaranteed against manufacturing defects as stipulated in the legal Directives and/or regulations
in force on guarantees for consumer goods applicable to the European Union and those of the country in which
it is marketed.
- It is essential to present the purchase invoice or receipt in order to process the guarantee through the seller
of the item or, failing that, through the manufacturer.
- The guarantee excludes anomalies or faults caused by misuse, non-compliance with the safety regulations
and instructions for use and maintenance provided, or due to wear and tear caused by normal use and regular
handling of the item.
- The label containing the serial number of your model must not be torn off under any circumstances as it
contains information relevant to the guarantee.
11