Motorola VAC-6058 Guia Del Usuario página 4

• Connect the power cord only to an appropriately fused and wired AC outlet with
the correct voltage, as specified on the product.
• Disconnect from line voltage by removing the power cord from the AC outlet.
• Remove the battery pack from the Multi-Unit Charger when charging is
completed.
• This Multi-Unit Charger is designed for charging only and is not designed for
operation (transmit or receive) of the radio. Always turn the radio off when
charging the battery.
• Periodically wipe the charging terminals in the each slot of the Multi-Unit Charger
using a dry cloth to ensure good connections between the charger and battery
pack.
• Ask your Motorola Solutions dealer regarding the usable AC Power Cord in your
area.
• When charging a battery pack alone (not attached to the radio), do not allow any
metal object to short the terminals of the battery pack.
• Do not allow any metal objects to short the terminals in the slot of the Multi-Unit
Charger, as a short-circuit could cause overheating of the charger circuitry and
create an electrical hazard.
Notice to Users (FCC and Industry Canada)
This device complies with Part 15 of the FCC rules and Industry Canada's license-
exempt RSS per the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that
may cause undesired operation.
• Changes or modifications made to this device, not expressly approved by
Motorola Solutions, could void the authority of the user to operate this equipment.
Specifications
Description
Input
Output
Charging Current
Charge Time
Operating Temperature Range
Case Size (W x H x D)
Weight (approximation):
Table 1: Specifications
AC 100-240 V~, 50-60 Hz
DC 8.4 V, 1.1 A (Li-ion)
1 A (each slot)
1.5 ~ 3.0 hours (Depends on the battery)
+41 °F to +104 °F (+5 °C to +40 °C)
17.5" x 3.9" x 6.7" (445 x 99.5 x 170 mm)
Charger: 4.2 lbs (1.9 kg)
Mounting Bracket: 1.6 lbs (720 g)
Spacer Plate: 0.3 oz (9 g)
2
Value