Usb Operation - auna Roadie 2K Manual De Instrucciones

EN
42
4. Repeat steps 2-3 to programme more tracks. Once it is completed, press
the SCAN/ button to start playback of the programmed tracks.
To cancel the programme, press the button twice, or open the disk tray and
then close it again.

USB OPERATION

USB slot operation
If there is not a compact disc in the CD compartment.
1. Press the SOURCE button to enter USB mode.
2. Insert a USB drive to the USB port
3. The operation of PLAY/PAUSE, STOP, REPEAT and PROGRAM is the same
as CD/MP3.
REP_ONE: Press the REPEAT button once, "REP_ONE" will show on the
display. It will play the current track repeatedly.
REP_ALBUM: Press the REPEAT button twice, "REP_ALBUM" will show on
the display. It will play the current folder repeatedly.
REP_ALL: Press the REPEAT button three times, "REP_ALL" will show on the
display. It will play all files repeatedly.
RANDOM: Press the REPEAT button four times, "RANDOM" will show on the
display. It will play all files repeatedly.
Notes
• The unit can only play MP3 file format in USB operation.
• If your USB device is loaded with MP3's but the display keeps showing
"NO" on the display, the format of your USB device might not be
compatible with the unit.
• This unit supports USB versions 1.1 and 2.0.
• The unit can support USB devices with up to 32GB of memory.
• The unit may not be compatible with all USB devices and memory
cards, this is not an indication of a problem with the unit.