Bt Operation - auna Roadie 2K Manual De Instrucciones

2. Press . Insert a cassette tape into the cassette tape compartment (2)
and then close the compartment cover
3. Press  to start recording (the play button will depress automatically at
the same time).
When recording from a disc: Playback starts automatically and recording
of all the tracks/files on the disc proceeds from the first track/file. When the
tape reaches the end, recording stops automatically.
When recording a radio program or sound from a connected optional
component: Recording continues until the tape reaches the end.

BT OPERATION

Please follow the pairing instructions below to link the unit to your BT
device.
1. Press the SOURCE button repeatedly to enter the BT mode. The display
will show "BT". It will start searching and will display a flashing "BT
LINK".
2. If the unit has never been paired with a BT device before or cannot find
the last paired device, the display and the BT status indicator will keep
on flashing. Turn on the BT function of your device and enable the search
until "Roadie 2k" is found. Select "Roadie 2k" on the BT device to make
connection. Enter the pass code "0000" if required.
3. After successfully paired the unit will display steady "BT LINK".
4. You can now start playing music from your smartphone wirelessly to the
speaker.
5. You can press the BT PLAY/PAUSE / button to pause or resume the
playback.
6. You can press the BT PREVIOUS  or BT NEXT  button to search to the
previous or next song.
Pressing and holding the PAIR button on the unit will disconnect the current
connection and start to search another new BT device.
EN
45