Bt Operation - auna US-10032056 Manual Del Usuario

BT OPERATION

Slide the "FUNCTION" switch to AUX/BT position. to turn ON the unit and
follow the directions below to connect via BT. (disconnect the AUX-IN
cable).
PAIRING (Linking) a BT-enabled cell phone or other BT-enabled device to
the Roadie
If the Roadie has never been paired with a BT device before. You need to
follow the pairing instructions below to link the Roadie with your BT device.
1. Slide the FUNCTION switch to the AUX/BT position.
2. BT "bt" message will appear and flash in the display.
3. If the Roadie has never been paired with a BT device before or cannot
find the last paired device, the "bt" will flash in the display to indicate
that the Roadie is in search mode. Follow the pairing instructions below
to link the Roadie with your BT device.
• Turn on the BT function of your BT device and enable the search or scan
function to find the Roadie
• Select " Roadie " from the device list when it appears on your device
screen. If required, enter the pass code "0000" to pair (link) the Roadie
with your device.
4. After successfully pairing (linking), display will change to show "bt"
steadily, the BT icon also will show in display. You can begin playing
music from your BT device wirelessly to the speaker.
5. After selecting your favorite song, press the PLAY/PAUSE button on the
unit to play or pause the song.
6. Adjust the VOLUME CONTROL to the desired volume level.
7. Press the  or  Button on the main unit to skip to the previous or next
song.
8. If you want to pair the Roadie with another BT-enabled device, press
and hold the PAIR Button for 3 seconds or turn off the BT function of the
device currently paired with the Roadie then repeat step 3 above.
Notes:
1. Refer to the manual of your cell phone, tablet PC, computer or other
BT-enabled devices for BT operation since it may vary from model to
model.
2. If your BT-enabled device does not support the A2DP profile, it will not
play the music through the speaker, even if paired (linked).
3. If you are pairing (linking) your computer to the unit using BT, you may
need to set the speaker as your computer's default sound device.
EN
17