Metra 99-3012G-LC Instrucciones De Instalación página 4

INSTALLATION INSTRUCTIONS FOR PART 99-3012G-LC
Wire connections to be made
Installing the Interface
1. Plug the interface into the vehicle and into the radio.
2. To initialize the interface, turn the ignition on and wait for 30 seconds, then turn
the ignition back off, and on again.
Testing the Interface
1. Turn the ignition on then turn the radio on and test for proper balance and
fader operation.
2. Close all the doors then turn the key off. The radio should stay on until the
driver's door is open.
METRA. The World's best kits. ™ 1-800-221-0932 metraonline.com
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
K P
NOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians