Dash Disassembly; Kit Preparation - Metra 95-6553B Instrucciones De Instalación

DASH DISASSEMBLY

1. Unclip, unplug, and remove the climate
control panel. (Figure A)
2. Unclip and remove the dashboard/
vent trim panel surrounding the radio
display. (Figure B))
3. Remove (4) 9/32" screws securing the
radio display, then unplug and remove
the display. (Figure C)
Continue to Kit Preparation
2
(Figure A)
(Figure B)
(Figure C)

KIT PREPARATION

1. Cut the sub-dash to allow room for the
aftermarket radio. (Figure A)
Note – do not cut into snap locations.
2. Attach (4) panel clips provided onto the
radio trim panel. (Figure B)
Continue to Kit Assembly
Remove shaded area
(Figure A)
(Figure B)
|
386.257.1187 MetraOnline.com