The Vpap Auto System; Mask - ResMed VPAP Auto Guia Del Usuario

The VPAP Auto System

Please refer to the illustrations in section A of the illustration sheet.
Front view (A-1)
Shows the keypad and LCD screen, and the air outlet.
Rear view (A-2)
Shows where the module attaches, and the location of the air filter and power
sockets.
Power cord (A-3)
Power cord to attach the VPAP Auto to the AC (mains) power.
Travel bag (A-4)
Air tubing (A-5)
The 6'6" (2 m) air tubing connects the VPAP Auto to your mask.

Mask

You will also need a ResMed mask system (supplied separately). The following
ResMed mask systems are recommended for use with the VPAP Auto:
Nasal Masks
Mirage Vista™ Nasal Mask
•
Ultra Mirage™ Nasal Mask
•
Ultra Mirage™ II Nasal Mask
•
Mirage Activa™ Nasal Mask.
•
Nasal Pillows Systems
Mirage Swift™ Nasal Pillows System
•
Mirage Swift™ II Nasal Pillows System.
•
Full Face Masks
Mirage™ Liberty Full Face Mask
•
Mirage™ Quattro Full Face Mask
•
Ultra Mirage™ Full Face Mask.
•
Notes:
Not all masks are available in all regions.
•
ResMed devices have been designed and manufactured to provide optimum
•
performance using ResMed vented mask systems. Other mask systems
may be used, however performance and data outputs may be affected.
In VAuto mode, only ResMed masks are compatible for use with the
•
VPAP Auto.
Your clinician needs to set up your VPAP Auto for use with your particular
•
mask.
The VPAP Auto System 5