Supplemental Oxygen - ResMed VPAP Auto Guia Del Usuario

Ocultar thumbs Ver también para VPAP Auto:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Humidifier
Please refer to the illustration in section B of the illustration sheet.
A humidifier may be required if you are experiencing dryness of the nose, throat,
or mouth. The VPAP Auto is compatible for use with the HumidAire 3i heated
humidifier (B).
WARNING
!
Only the HumidAire 3i is compatible for use with the VPAP Auto. Please
refer to Warnings on page 2.
Accessories
Please refer to the illustrations in section C of the illustration sheet.
The following accessories are available for use with the VPAP Auto:
ResScan Data Card (C-1)
ResScan Data Card module (C-2)
Blank module (C-3)
DC-12 converter (C-4)
Air tubing 9'10" (3 m) (C-5).
Note: ResMed recommends the following tubing products for use with the
VPAP Auto: 9' 9" (3 m) air tubing, gray (PN: 14980); 6' 6" (2 m) air tubing, gray
(PN: 14948); disposable air tubing, clear (PN: 14912).

Supplemental Oxygen

The VPAP Auto is designed to be compatible with the use of low flow oxygen
therapy provided from an external source. At a fixed flow rate of supplemental
oxygen flow, the inhaled oxygen concentration will vary, depending on the
pressure settings, patient breathing pattern, mask selection, and the leak rate.
This warning applies to most types of PAP machines.
6

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido