Menus
The menu allows you to view details about the time used and the current
software version of your VPAP Auto. The Used (time) screen displays the total
number of hours for which you have used the device since it was last reset by
the clinician. It also displays the number of days the VPAP Auto was used out of
the total number of days available for use. The SW screen displays the current
software version that is installed in your VPAP Auto.
Figure 2 summarizes the VPAP Auto standard menu series.
To access the VPAP Auto menus:
•
Press the Left key (menu) while the VPAP Auto (or Ramp or Settling) screen
is displayed.
To scroll through items within the menu:
•
Press the Up/Down key
To exit out of the menu:
•
Press the Right key (exit)
VAuto mode
SETTLE: 20min
menu
EXHALATION: MED
change
Figure 2: VPAP Auto Menu Series
Note: The Exhalation screen is only available if enabled by a clinician.
S mode & CPAP mode
exit
USED: 00000hrs
00000/00000days
MASK: MIR FULL
change
exit
SW: SX3650201
exit
RAMP: 20min
menu
Preparing for Use
11