Replacing the Air Filter
To replace the air filter:
1. Remove the air filter cover at the back of the VPAP Auto.
2. Remove and discard the old air filter.
3. Insert a new filter with the blue tinted side facing out from the device.
4. Replace the air filter cover.
Inspect the air filter every month to check if it is blocked by dirt or contains holes.
With normal use of an VPAP Auto, the air filter needs to be replaced every six
months (or more often if your device is in a dusty environment).
WARNING
!
Do not wash the air filter. The air filter is not washable or reusable.
•
The air filter cover protects the device in the event of accidental liquid
•
spillage onto the device. Ensure the air filter and air filter cover are fitted
at all times.
Servicing
CAUTION
!
Do not attempt to open the VPAP Auto case. There are no user
•
serviceable parts inside.
Inspection and repair should only be performed by an authorized agent.
•
Under no circumstances should you attempt to service or repair the flow
generator yourself.
This product (VPAP Auto) should be inspected by an authorized ResMed service
center 5 years from the date of manufacture. Prior to this, the device is intended
to provide safe and reliable operation provided that it is operated and maintained
in accordance with the instructions provided by ResMed. Applicable ResMed
warranty details are provided with the device at the time of original supply. Of
course, as with all electrical devices, if any irregularity becomes apparent, you
should exercise caution and have the device inspected by an authorized ResMed
service center.
If you feel that your flow generator is not performing properly, see
"Troubleshooting" on page 24.
Air filter cover
Cleaning and Maintenance
23