Configuring the user data
Notes:
• To configure STEP 7, use HW Config.
The Discrete input function block supplies the content of the OUT parameter.
Diagnosis
Pointek CLS200/300 can actively report information on its own status. Please see the full
manual for a list of diagnostic messages.
Remote Operation via PROFIBUS PA
To use PROFIBUS PA, you will need a PC configuration tool: we recommend SIMATIC PDM. You
can download an application guide from the product page at www.siemens.com/pointek. Also
see the proprietary operating instructions or online help for details.
Functions
Open the device menu (top left side of screen) for access to the following functions: upload
from/download to the device; set address; master reset; write locking; sensor test via
PROFIBUS PA; and simulation.
Changing parameter settings
• First launch SIMATIC PDM, connect to Pointek CLS200/300, and upload data from the
device.
• Adjust parameter values in the parameter view field (right side of screen).
• When you have completed the adjustments, open the Device menu, download data to the
device, then save parameter settings offline.
• Go to View – Display to track the effects.
Page EN-12
Pointek CLS200/300 (Digital) – QUICK START MANUAL
All manuals and user guides at all-guides.com
7ML19985XA82