Identification Label; Main Components - ST MPST 84 Li 48 V1 Manual Del Usuario

of the behaviour to follow to use it with
the necessary attention and caution.
Meaning of symbols:
WARNING
Read the instructions before
operating the machine.
WARNING
Disconnect the key and
read the instructions
before carrying out any
maintenance or repair work.
OBJECTS EJECTION
HAZARD
Do not operate without either
the rear discharge guard or the
grass catcher being in place.
(for models with rear collection
only)
OBJECTS EJECTION
HAZARD
Do not operate without side
discharge chute in place.
(for models with side discharge
only)
OBJECTS EJECTION
HAZARD
Keep people away from the
work area when in use.
MACHINE OVERTURNING
HAZARD
Do not use this machine on
slopes greater than 10°.
CRUSHING HAZARD
Make sure that children stay
clear of the machine all the
time when motor is running.
CUTTING HAZARD
Cutting means in motion. Do
not put hands or feet near
or under the opening of the
cutting means housing.
WARNING
Do not fix LED lamps while
operating.
SAFETY INSTRUCTIONS
Any damaged or illegible decals must
be replaced. Order replacement decals
from an authorised service centre.

4.3 IDENTIFICATION LABEL

The identification label holds the
following data (Fig. 1):
1. Sound power level.
2. CE conformity marking.
3. Year of manufacture.
4. Type of machine.
5. Serial number.
6. Name and address of Manufacturer.
7. Article code.
8. Max. motor operation speed.
9. Weight in kg.
10. Electrical protection rating.
11. Rated voltage.
12. Battery capacity.
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
SAFETY INSTRUCTIONS
Quote the information on the product
identification label whenever you contact
an authorised service workshop.
NOTE
The example of the Declaration of Conformity
is provided on the last pages of the manual.

4.4 MAIN COMPONENTS

The machine is composed of a series
of main components that have the
following functions (fig.1 ) :
A. Cutting-means assembly: this is
the assembly comprising the casing
that houses the rotating cutting
means, and the cutting means.
B. Cutting means: these are what cut the
grass; the fins at the ends help convey the
cut grass towards the discharge chute.
C. Side discharge chute: a safety device
to prevent objects drawn up by the cutting
means from being hurled by the machine
(only for side discharge models ).
D. Discharge chute: this is the part connecting
the cutting-means assembly to the grass
catcher (for models with rear collector only).
E. Grass catcher: as well as collecting the
grass cuttings, this is also a safety element
that stops any objects drawn up by the
cutting devices from being hurled away from
the machine (for rear collection models only).
F. Rear discharge guard (available upon
request): this can be fitted in place of the
grass catcher and prevents objects from
being drawn up by the cutting means
EN - 8