How To Assemble - Hamilton Beach 67735 Manual Del Usuario

How to Assemble

1. Place Strainer Bowl on top of
the Motor Base. Then place
Stainless Steel Strainer Basket
inside Strainer Bowl.
5. Place Pulp Container into
position by tilting Container
slightly.
Strainer Basket
2. With hands on outer edge,
press Strainer Basket down
firmly to latch into position.
6. Place Juice Cup under Juice Spout. Slide Food Pusher down Feed
Chute by aligning groove in Food Pusher with small ridge on the
inside of top of feed tube.
Before first use: After unpacking the Juice Extractor, remove cardboard
from Filter Basket and wash everything except Base in warm, soapy
water. Rinse and dry immediately. Never immerse the Base in water or
other liquids; wipe it with a damp sponge.
3. Place the Juicer Cover over
Strainer Bowl, positioning Feed
Chute over the Strainer Basket,
and lower into position.
Small ridge
inside Feed
Chute
4. Raise Locking Latches up to
lock into place.
HINT: To minimize cleanup, place
a plastic grocery bag in Pulp
Container to collect pulp. (See
page 6 for more information.)
5