How To Assemble - Hamilton Beach 67500 Manual De Instrucciones

How to Assemble

1. Place Strainer Bowl on top
of Motor Base. Then place
Stainless Steel Strainer Basket
inside Strainer Bowl.
5. Place Pulp Container into
position by tilting Container
slightly.
Strainer Basket
2. With hands on outer edge,
press Strainer Basket down
firmly into position.
6. Place a glass or other container under Juice Spout. Slide Food Pusher down Feed
Chute by aligning groove in Food Pusher with small ridge on inside of top of Feed
Chute.
Before first use: After unpacking Juice Extractor, remove cardboard
from Basket and wash everything except Motor Base in warm, soapy
water. Rinse and dry immediately. Never immerse Motor Base in water
or other liquids; wipe it with a damp sponge.
3. Place Juicer Cover over
Strainer Bowl, positioning Feed
Chute over Strainer Basket,
and lower into position.
Small Ridge
Inside Feed
Chute
4. Raise Locking Latches up to
lock into place.
HINT: To minimize cleanup,
place a 100% compostable large
storage bag or grocery bag in Pulp
Container to collect pulp. (See
page 6 for more information.)
5