Kohler K-2431 Guia De Instalacion página 3

Before You Begin (cont.)
For all installations: When planning the location, ensure there is
a minimum clearance of 6" (15.2 cm) on each side of the product.
This distance is required to allow the user to fully extend the
drawers. A minimum clearance of 6" (15.2 cm) between bottom of
cabinet with integrated faucet and rim of lavatory if applicable.
For K-2432 : When planning the location, ensure there is a
minimum clearance of 6" (15.2 cm) between the bottom of the
wall storage with integrated faucet and rim of lavatory.
Select fasteners that are long enough to secure the wall storage to
the finished wall. Take into account the combined thickness of the
mounting rail and wall material.
If installing multiple components (wall storage, countertop,
lavatory) read all product installation instructions before
beginning. Install some components before others.
Install sufficient bracing when installing this product in an area
with unfinished walls or in conjunction with other components in
the same Kohler Suite. When installing this product in an area
with a finished wall, use wall anchors (not provided) for the
installation.
Make sure electrical power can be provided before beginning the
installation. Power to the wall storage should not be controlled by
the light switch.
Establish and install all plumbing rough-ins in the correct location
before beginning installation of the wall storage. Use a 90°
shut-off valve with 3/8" compression outlet.
NOTE: The mirrored door functions as a service access for the
electrical components and faucet. Use the sliding drawers for
storage access.
Kohler Co. reserves the right to make revisions to the design of
products without notice, as specified in the Price Book.
Kohler Co. 3 1059686-2-A