Tools And Materials; Before You Begin - Kohler K-2431 Guia De Instalacion

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Measuring Assorted
Tape Screwdrivers
2x4 Lumber Level

Before You Begin

DANGER: Risk of electric shock. Connect only to a circuit
protected by a Class A Ground-Fault Circuit Interrupter
(GFCI) or Earth-Leakage Circuit Breaker (ELCB). Use a 120 V,
20 A service.
CAUTION: Risk of personal injury or product damage. This
product is very heavy. Get assistance lifting the product.
CAUTION: Risk of product damage. Do not exceed 10 lbs
(4.5 kg) of storage in each sliding door.
CAUTION: Risk of property or product damage. Install
fasteners (not provided) to a stud to avoid possible property
and product damage. If this is not possible, wall anchors (not
provided) must be inserted before installing the fasteners.
Select fasteners with a minimum of 50 lb (22.68 kg) load
bearing.
Observe all local building codes.
Prior to installation, unpack the new product and inspect it for
damage. Return the product to its protective carton until you are
ready to install it.
1059686-2-A
Plus:
• Fasteners [Min 50 lb
(22.68 kg) Load Bearing]
• Wall Fasteners
Drill Pencil
• Class A Ground
Fault Circuit Interrupter
• Woodworking Tools
and Materials
• Finished Wall Material
• Drill Bits
Safety
Glasses
2 Kohler Co.