Kohler K-2431 Guia De Instalacion página 9

Complete the Installation (cont.)
For All Models:
Remove top cover from metal channel inside center of cabinet.
Hard wire electrical supplies. Ensure power cable is routed
through the strain relief located at top of the hard wiring
compartment.
Replace cover on metal channel.
Installation Checkout
Disengage the prop rod from the access panel.
Close the center access door, taking care to make sure all utility
lines are tucked into utility cavity without being kinked or
pinched.
Reinstall the two locking screws.
Open the lavatory drain, if applicable.
Complete the water supply (if applicable to your model) and
electrical installation, then test for proper function.
Kohler Co. 9 1059686-2-A