Kohler K-2431 Guia De Instalacion página 6

1
22-1/4"
(56.5 cm)
15-3/16"
(38.6 cm)
Measure and
mark the hanger
locations.
3
22-1/4"
(56.5 cm)
15-3/16"
(38.6 cm)
Mark and drill
the fastener
locations.
2. Mount the Hangers
Install the vanity and lavatory according to the manufacturer's
instructions.
Mark the lavatory's centerpoint 15-3/16" (38.6 cm) above the
lavatory rim. (1)
Mark the lavatory's centerpoint 22-1/4" (56.5 cm) above the
previously marked point.
Center the bottom of each hanger at the marks, then level each
hanger. (2)
CAUTION: Risk of property or product damage. Install
fasteners to a stud to avoid possible property and product
damage. If this is not possible, anchors must be inserted
before installing the fasteners. Select fasteners with a
minimum of 50 lb (22.68 kg) load bearing.
IMPORTANT! A minimum of four fasteners must be used for each
hanger to support the weight of the wall cabinet.
Mark at least four of the mounting hole locations on each hanger,
then confirm the marks are level. (3)
1059686-2-A
2
Level the
hangers.
4
Secure the
fasteners.
6 Kohler Co.