Idrac Direct Led Indicator Codes - Dell PowerEdge R630 E26S Serie Manual Del Propietário

Tabla 12. Indicadores de estado de la PSU de CC (continuación)
Convención Patrón de los
indicadores de
alimentación
D Apagado
Identifier
Version
Status

iDRAC Direct LED indicator codes

The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC
subsystem.
NOTE: The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.
Figure 13. iDRAC Direct LED indicator codes
1. iDRAC Direct status indicator
The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using the management
port (USB XML Import).
Table 13. iDRAC Direct LED indicators
Convention
A
B
C
D
The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and cable (Laptop
Connect):
Condición
Cuando dos PSU idénticas reciben diferentes voltajes de entrada,
pueden provocar tensiones diferentes y producir una discordancia.
PRECAUCIÓN:
deben tener la misma alimentación de salida máxima.
PRECAUCIÓN:
en caso de combinarlas, se producirá un error de compatibilidad.
La alimentación no está conectada.
GUID-B78FC6EE-0A44-41A9-B7BB-18B2285C2528
7
Released
iDRAC Direct LED
indicator pattern
Green
Flashing green
Green and turns off
Not lit
Si se utilizan dos PSU, deben ser del mismo tipo y
No se admite la combinación de las PSU de CA y CC y,
Condition
Turns green for a minimum of two seconds to indicate the start and end
of a file transfer.
Indicates file transfer or any operation tasks.
Indicates that the file transfer is complete.
Indicates that the USB is ready to be removed or that a task is complete.
Descripción general del sistema Dell PowerEdge R630 27