Pressure Alarms; Indoor Temperature Alarms - Technoline WS 2816 Manual De Instrucciones

PRESSURE ALARMS

 In the normal display mode, press the ALARM key once. The high pressure
alarm display will be shown.
 Press and hold the SET key for about 2 seconds. The pressure digit will start
flashing.
 Press the ▲UP ARROW key or ▼DOWN ARROW key to set the high pressure
alarm value. Hold the arrow key in to change the value faster.
 Press the ALARM key to confirm the setting. The digit will stop flashing.
 Press the SET key to switch the alarm on or off. The ((())) icon indicates the
alarm is switched on.
 Press the ALARM key once. The Low Pressure alarm display will be shown.
 Press and hold the SET key for about 2 seconds. The pressure digit will start
flashing.
 Press the ▲UP ARROW key or ▼DOWN ARROW key to set the low pressure
alarm value. Hold the arrow key in to change the value faster.
 Press the ALARM key to confirm the setting. The digit will stop flashing.
 Press the SET key to switch the alarm on or off. The ((())) icon indicates the
alarm is switched on.
 Press the ALARM key to move to the indoor temperature alarm settings.

INDOOR TEMPERATURE ALARMS

 The high indoor temperature alarm display will be shown.
 Press and hold the SET key for about 2 seconds. The temperature digit will start
flashing.
 Press the ▲UP ARROW key or ▼DOWN ARROW key to set the high indoor
temperature alarm value. Hold the key in to change the value faster.
55