Viewing The Min/Max Weather Data; Reset The Minimum And Maximum Weather Data; Total Rainfall Amount; Care And Maintenance - Technoline WS 2816 Manual De Instrucciones

 Last week rainfall - it shows the weekly rainfall. The rainfall measurement starts
counting on the second day after power up. (Eg.: if the unit is powered up on
Monday day time, then the weekly rainfall is updated every Tuesday after 23:59 h
(11:59 pm))
 Last month rainfall - reset every 1

VIEWING THE MIN/MAX WEATHER DATA

The weather station will record the maximum and minimum value of the various weather
data with time and date of recording automatically. The following stored maximum and
minimum weather data can be viewed by pressing the MIN/MAX key in normal display
mode.
 MIN/MAX indoor temperature with the date and time of recording
 MIN/MAX indoor humidity with the date and time of recording
 MIN/MAX outdoor temperature with the date and time of recording
 MIN/MAX dew point temperature with the date and time of recording
 MIN/MAX outdoor humidity with the date and time of recording
 MAX wind gust with the date and time of recording
 Total rainfall with the date and time of recording

RESET THE MINIMUM AND MAXIMUM WEATHER DATA

To reset the aforementioned MIN/MAX weather data, you need to reset each of the data
independently.
 Press MIN/MAX key to show the desired weather data.
 Press ▲UP ARROW key. The stored value will be reset to the current value and
current time.

TOTAL RAINFALL AMOUNT

The total rainfall measurement is displayed in the unit of mm or inch. It shows the total
rainfall accumulated since last reset of the total rainfall amount.
In either Mode 1 or Mode 2 display, press the MIN/MAX key until the display shows the
total rainfall value.
To reset the rainfall reading, press the ▲UP ARROW key. The total rainfall amount will
be reset to 0, and the time updated to current time.
Note: Until the first rainfall total reset is performed, the time and date of the total
rainfall are displayed as "- - -.--.----". After the rainfall total is reset, the rainfall total
display will indicate the date and time of the last rainfall total reset.

CARE AND MAINTENANCE:

 Extreme temperatures, vibration and shock should be avoided as these may cause
damage to the unit and give inaccurate forecasts and readings.
 Precautions shall be taken when handling the batteries. Injuries, burns, or property
damage may be resulted if the batteries are in contact with conducting materials,
st
of month at 00:00 (midnight) (12:00am).
63