Conceptronic CM2H Manual De Usuario página 24

ENGLISH
Connecting the Audio Cable(s)
You can connect the CM2H to your TV and/or your home cinema system in 2 different ways:
- Analog, through the RCA audio jacks on the AV cable.
- Digital, Through the HDMI output of the CM2H.
Analog:
 Connect the AV cable to the AV output connector [B] on the CM2H.
 Connect the other end of the AV cable to the RCA audio jacks of your TV or amplifier.
Digital:
 Connect a HDMI cable to the HDMI output [C] on the CM2H.
 Connect the other end of the HDMI cable to the HDMI input of your TV or amplifier.
Connecting the Power Supply
When the CM2H is connected to your Audio/Video equipment, you can connect the power supply to the
CM2H.
 Connect the included power supply to the DC input [A] of the CM2H and to a free wall socket.
When the power supply is connected, the CM2H will turn on automatically and is ready to use.
Preparing the Remote Control
The remote control is using 2x AAA batteries (provided with the package).
You need to use the remote control to turn on/off the CM2H.
Notes: - The best operational range of the remote control is about 5 meters.
- Point the remote control to the IR receiver which is embedded in the front panel of the
CM2H.
- The receiving angle of the IR receiver is ±30 degrees.
- Change the batteries (2x AAA) when they are weak or empty.
24