Before You Begin - Sanus MF209 Manual De Instrucciones

Before You Begin -

1
Select TV Hardware and Mount TV Brackets
1-1
Choose screw length and diameter
1-2
Select the hardware confi guration
Your TV type will help you determine which hardware confi guration to use. Match your type of TV to the suggested
hardware confi guration on the next page.
Installation option without spacers (TVs with fl at backs).
A.
Installation option using spacers (TVs with obstructed backs or inset mounting holes).
B.
A
6
Determine Your TV Hole Pattern
200 mm
100 mm
75 mm
200 mm
75 mm
100 mm
200 mm
100 mm
75 mm
Hand thread screws into the threaded inserts on
the back of your TV to determine the correct screw
diameter (M4, M6, or M8).
Verify that there are adequate threads to secure the
brackets to the monitor. If you encounter resistance,
stop immediately and contact customer service.
CAUTION:
Avoid potential personal injuries
and property damage! Use the shortest screw and
spacer combination to accomodate your needs. Using
hardware that is too long may damage your monitor's
internal components.
B
200 mm
75 mm
100 mm
6901-002129 <02>