Auto Power-Off; Squelch Opening; Selecting Frequency Mode, Channel Name Mode, Channel Number Mode - Midland CT3000 Manual De Instrucciones

Auto power-off

You can set the automatic turning off for CT3000.
1. Enter the radio menu and follow this procedure:
MENU FUNC MENUAPO
2. Set the desired level: 30/60/120 minutes and confirm by pushing the
main knob.
Press P3 to exit the menu and return in stand-by mode.
3.

Squelch opening

CT3000 automatically sets the squelch opening rules according to parame-
ters that you set, such as for example CTCSS/DCS tones or DTMF codes.
If you want to modify the squelch opening rules, follow this procedure:
1. Enter the radio menu and follow these steps:
MENUCHAN MENUSIGNAL
2. Set the desired value and confirm by pushing MENU or PTT.
3. Press FUN to exit the menu and return in stand-by mode.
Selecting frequency mode, channel name mode, chan-
nel number mode:
1. Access the menu and follow these steps:
MENUFUNC MENUDSP
2. You can choose amongst the following options:
• FRQ Mode: the radio will be set in frequency mode; to switch to chan-
nel mode press V/M.
• CH Display Mode: channel mode. The channel number will be shown
in the display. It is not possible to switch to frequency mode through
the V/M button.
• MR Display Mode: the radio will be set to channel mode but the chan-
nel name will appear in the display. To switch to channel mode press
V/M.
3. Set the desired mode and confirm your selection by pushing the main
knob.
4. Press P3 to exit the menu and return in stand-by mode.
24 | Midland CT3000 instruction guide