Dtmf Functions; Transmitting A Dtmf Code; Transmitting A Memory Dtmf Code; Changing A Memory Dtmf Code And The Tx Time Of Dtmf Codes - Midland CT3000 Manual De Instrucciones

DTMF functions

CT3000 can store up to 16 DTMF codes with 16 digits.
The DTMF code memories can be changed with the optional programming
software.

Transmitting a DTMF code

1. Keep pressed PTT.
In tx mode press the controls corresponding to your DTMF code. You will
2.
hear the code from the speaker of the radio.

Transmitting a memory DTMF code

This function is enabled only if you set your DTMF code by means of the pro-
gramming software.
Select the desired customised DTMF code
1.
2. Access the radio menu and follow these steps:
3. MENU DTMF MENUCALL
Select the desired DTMF code and confirm with the main knob.
4.
5. Press the control associated to the CALL function (previously set in
HAND KEY menu)
Changing a memory DTMF code and the tx time of
DTMF codes
These functions can be enabled by means of the optional programming soft-
ware.

Selective calls with DTMF codes

CT3000 can answer selective calls and open the squelch only in case you re-
ceived a call with your DTMF code (DTMF ID or 5 Tone ID).
This function can be enabled through the programming software.
Note: DTMF settings can be changed only with the optional programming sof-
tware.
22 | Midland CT3000 instruction guide