Ec Declaration Of Conformity - SystemAir RVK Instrucciones De Funcionamiento Y De Mantenimiento

GB
Manufacturer
Our products are manufactured in compliance with applicable inter-
national standards and regulations.
Systemair GmbH
Seehöfer Str. 45
DE-97944 Windischbuch
GERMANY
Office: +49 7930 9272-0
Fax: +49 7930 9272-92
The manufacturer hereby confirms that the following products:
Duct fans, circular ducts
RVK
Duct fans, rectangular ducts
KVTI, MUB
Centrifugal fans
GT, GC, GR
Roof fans
DVS, DHS, DVSI, DVN, DVNI, DVV
Air handling unit
F16, F30, F35, K25, K42, K62, K100
Axial fans
AW, AR, AXV, AXC, AXG
Other fans
KBR, KBT
Comply with the following EC-directives:

EC Declaration of Conformity

as defined by the EC Machinery Directive
98/37/EEC, Annex II A. Fans for ventilation in air handling systems
with air from non-explosion hazardous premises. This machinery
must not be put into operation until prior to reading mounting
instructions and safety information.
The following harmonized standards are in use:
EN 60 034-1 Rotating electric machinery; ratings and performances.
EN 60 204-1
Safety of machinery; electrical equipment of machines; general
requirements.
EN 292-1
Safety of machinery; basic concepts, general principles for design.
EN 294
Safety of machinery; safety distances to prevent danger zones
reached by the upper limbs.
Remark: EN 294 only complies when fitted contact safety device is
part of the extent of delivery.
EC Declaration of Conformity
as defined by the EC Low Voltage Directive 73/23/EEC and 93/68/
EEC
The following harmonized standards are in use:
EN 60 204-1
Safety of machinery; electrical equipment of machines; general
requirements.
EN 60 034-5
Rotating electric machinery; part 5: Protection classification for elec-
tric machinery.
EN 60 335-1
Electric domestic products and similar – safety-general require-
ments.
EN 60 335-2-80
Electric domestic products and similar – safety-general part 2:
Special requirements regarding fans.
EN 50 106 Electric domestic products and similar-Safety-Instructions
for control of manufacture. Remark: EN 50 106 complies for inter-
nally wired products only.
EC Declaration of Conformity
as defined by EC's EMC-directive 89/336/EEC, 92/31/EEC and
93/68/EEC
The following harmonized standards are in use:
EN 61000-6-3: Electromagnetic compatibility - Generic immunity-
Emission –Part 1: General requirements for equipment in homes,
offices, shops and similar environments.
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2:
General requirements – Immunity for appliances in industrial envi-
ronments.
The complete technical documentation is available.
Windischbuch, 26 June 2003
Kurt Maurer
Managing Director