geberit Sigma 80 Manual Del Usuario página 12

Target group
Target group
This document is intended for operators of the Geberit WC flush control with Sigma80 actuator plate.
Intended use
The Geberit WC flush control with Sigma80 actuator plate is intended for flush actuation with GeberitSigma concealed
cisterns.
Explanation of symbols
Symbol
CAUTION
Safety notes
- If there is any indication of damage or faults, do not open and attempt to repair the WC flush control yourself; call in
a skilled person
- Repairs may only be carried out by skilled persons using original spare parts and accessories
- Do not modify the WC flush control or add any additional modules
- Operation and care may only be performed by the operator or user as described in these operating instructions
Operation
When you approach the WC, the two sensors on the actuator plate light up. Place your hand in the activation area to
activate a flush. You do not need to touch the actuator plate. The activation area starts approximately 15 cm in front of
the actuator plate.
- For a long flush, place your hand in front of the long sensor on the left
- For a short flush, place your hand in front of the short sensor on the right
12
All manuals and user guides at all-guides.com
Meaning
Refers to a potentially dangerous situation that may cause slight or moderate injury or
material damage.
Refers to important information.