Yamaha GRIZZLY 660 Manual Del Propietário página 308

1. Seat under bracket
1. Support de la base de la selle 2. Cache G
1. Ménsula inferior del asiento 2. Panel G
2. Panel G
3. Remove the seat under bracket and the pan-
el by pulling them off.
To install
1. Place the panel and the seat under bracket in
the original position.
2. Install the rear carrier by installing the bolts
and tightening them to the specified torques.
Tightening torques:
Carrier bolt (top):
26 Nm (2.6 m·kgf)
Carrier bolt (under fenders):
7 Nm (0.7 m·kgf)
3. Install the seat.
8-37