Checking/Sharpening/Replacing The Blade; Adjusting The Carburettor; Maintenance Intervals - Grizzly BRM 4013 Traducción Del Manual De Instrucciones Original

GB
Checking/Sharpening/Replac-
ing the Blade
Only allow specialist companies to
install and dismantle the knife.
Wear gloves when handling the
blade.
• Take off the spark plug connector
14) and check the blade for wear
(
and damage.
• Always have a blunt blade resharp-
ened by a specialist company, as an
imbalance check can be carried out
there.
• Always have a specialist workshop
change a damaged or imbalanced
blade.
Incorrect installation can result
in serious injury.
Maintenance Work
(See "cleaning and mainte-
nance")
Check and tighten screws,
nuts and bolts
Check the engine oil level/pet-
rol level and refill with engine
oil/petrol if required
Clean operating elements / the
area around the silencer
Change the engine oil
Replace the air filter
Clean/adjust the spark plug
Replace the spark plug
Clean the air cooling system
Replace more often if there is a high level of dust or heavy dirt
a
86
Before


a
a,b

Adjusting the Carburettor

The carburettor has been preset in the
factory for optimum performance. If read-
justments are required, have the adjust-
ments made by a specialist workshop.

Maintenance Intervals

Regularly carry out the maintenance work
listed in the "maintenance intervals" table.
Regular maintenance prolongs the life of
the equipment. It also gives optimum cut-
ting performance and avoids accidents.
After
After
st
1
Work
Hrs.


After After
5
8 Hrs. 50 Hrs.




Annual



