Kohler K-1913 Guia De Instalacion página 25

Install the Mounting Brackets and Pulley Assemblies (cont.)
Install the Pulley Assemblies
NOTE: Make sure each pulley assembly is located on the side it was originally installed on.
Position a pulley assembly onto the mounting bracket.
Align the mounting holes in the center of the slot.
Secure the pulley assembly to the mounting bracket with the previously removed red screws.
Repeat with the second pulley assembly.
Reconnect the limit switch wires, making sure they do not interfere with the pulleys or cables as
they move.
Kohler Co. 25 1128532-2-G