Battery Charge - BMW Urban Hybrid E-Bike Instrucciones De Uso

EN
Charging status.
– Red light (blinking): Abnormal charging. Interrupt the process and
start again following the indicated sequence.
– Green light (blinking): Charge completed and charger in stand-by
mode.
Interrupting the charging process does not damage the
battery pack.
The battery pack reaches its maximum service life, if it is
charged in ambient temperatures between 10ºC and 30°C.
Attention: Do not attempt to charge or use a damaged
battery pack.
Charging status display.
charging status of the battery pack after pressing the LED button (1).
Each LED corresponds to about 20% capacity. The charging status
of the activated battery pack is also shown on the display.
Over 80%
60% - 80%
40% - 60%
1
20% - 40%
c
LED ring.
The LED rings located at both sides of the front rack mount cylinder
also provides battery charge information, in addition to other
functions as explained in the following graphic:
Starting up:
3 times

Battery charge:

(c) show the
Blue
8.5 Energy Saving Protection modes.
long-life cycle. This is possible thanks to the advanced automatic
consumption and risks due to temperatures out of range.