Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
en
16 | BS� ���� | Symbols used
1.
Symbols used
1.1
Documentation
Pictograms linked with the key words Danger, Warning
and Caution are warnings and always indicate an imme-
diate or potential hazard to the user.
Danger!
Immediate danger that could cause serious
personal injury or death.
Warning!
Potentially dangerous situation that could
cause serious personal injury or death.
Caution!
Potentially dangerous situation that could
cause personal injury or damage to property.
!
Important – warns of a potentially hazardous situa-
tion in which the BSA 43xx, the test sample or other
object in the vicinity could be damaged.
In addition to these warnings, the following symbols are
also used:
i
Info – important information that has to be observed.
¶
Single-step procedure – instructions for a procedure
that can be completed in just one step.
? Intermediate result – an intermediate result is dis-
played during a procedure.
"
Final result – the final result is displayed at the end
of the procedure.
1.2
BS� ����
Disposal
Old electrical and electronic devices, including
cables and accessories or batteries must be
disposed of separate to household waste.
|
1 691 606 210
2010-09-21
2.
User information
2.1
Important notes
Important information on copyright, liability and war-
ranty provisions, as well as on equipment users and
company obligations, can be found in the separate
manual "Important notes on and safety instructions for
Bosch Test Equipment". These instructions must be
carefully studied prior to start-up, connection and op-
eration of the BSA 43xx and must always be heeded.
2.2
Safety instructions
All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety in-
structions for Bosch Test Equipment" (user information,
order number 1 691 696 900). These instructions must
be carefully studied prior to start-up, connection and
operation of the BSA 43xx and must always be heeded.
2.�
Other applicable documentation
All documents for series BSA 43xx / SDL 43xx:
Document
User information
Product description
R Brake tester BSA 43xx
R Suspension tester SDL 43x
R Side slip tester SDL 410
R IR remote control
Operating instructions
R with analog display
R with PC
Test log book de / en
Brief instructions de / en
R BSA 43xx stand alone
R Testlane SDL 43xx
Planning folders de / en
R BSA 43xx stand alone
(not BSA 436x)
R BSA 436x stand alone
R SDL 43x stand alone
R Testlane SDL 43xx
SDL 43xx
EU Declaration of Conformity
R BSA 43xx stand alone
R Testlane SDL 43xx
2.�
Configuration
!
Only Service personnel are authorized to make all the
necessary configuration settings and calibrate the sen-
sors.
2.5
Electromagnetic compatibility (EMC)
The BSA 43xx is a class B product as per EN 61 000. .
Order number
1 691 696 900
1 691 606 210
1 691 626 210
1 691 636 210
1 691 696 215
1 691 696 010
1 691 706 010
1 691 696 600 / 1 691 696 601
1 691 606 400 / 1 691 606 401
1 691 696 400 / 1 691 696 401
1 691 606 300 / 1 691 606 301
1 691 606 350 / 1 691 606 351
- / -
1 691 696 300 / 1 691 696 301
1 689 974 326
1 698 974 328
Robert Bosch GmbH
Publicidad
Capítulos
Tabla de contenido
