Bosch BSA 43 Serie Descripción Del Producto página 19

�.6 Components
�.6.1 Master switch bo�
The master switch box contains the master switch for
activation and deactivation and supplies the device
with power.
1
2
Fig. 2: Master switch box (standard)
1 Master switch with EMERGENCY STOP function
2 Inputs and outputs for power and data cables
�.6.� �nalog display
The analog display of the BSA 43xx indicates measured values, operating statuses, fault statuses and messages. For
operation and details of the elements, refer to the operating instructions for the BSA 43xx.
Fig. 3: Elements of analog display 8 kN
Robert Bosch GmbH
952000 -02_IN
Product description | BS� ���� | 19
�.6.2 Infrared (IR) remote control unit
The infrared remote control is used for control com-
mands, data entries and program modifications. The
commands are relayed via the infrared receiver on the
analog display to the dynamometer control system.
i
For further information see product description
(1 691 696 2151 691 696 215).
2 5
6 4
Fig. 4: Elements of analog display 2 x 8 kN
BS� ���� | 19 | 19 en
7
1
3
|
1 691 606 210 2010-09-21