Use Procedure - Varian Turbo-V 81-AG Manual De Instrucciones

Ocultar thumbs Ver también para Turbo-V 81-AG:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
8
1
2
3

USE PROCEDURE

Controller Startup
To startup the controller plug the power cable into a
suitable power source.
Starting the Pump
To start the pump, confirm the interlock input and press
the START pushbutton on the controller front panel.
Pump Shutdown
To shutdown the pump press the STOP pushbutton on
the controller front panel.
MAINTENANCE
The Turbo-V 81-AG Rack series controller does not
require any maintenance. Any work performed on the
controller must be carried out by authorized personnel.
When a fault has occurred it is possible to use the
Varian repair service. Replacement controllers are
available on an advance exchange basis through
Varian.
!
Before carrying out any work on the controller,
disconnect it from the supply.
If a controller is to be scrapped, it must be disposed of
in accordance with the specific national standards.
7
6
Controller Turbo-V 81-AG Rear panel
WARNING!
1. Logic input signals connectors (mating connector supplied
with link).
2. Logic output signals connector and pump frequency
monitor plus programmable analog output.
3. Power output connector (24 Vdc for pump cooling fan,
Vent Valve and Gauge).
5
4. Controller power entry module consisting of mains fuses,
mains socket and EMC filter.
5. Rotary switches for Profibus address setting.
6. Profibus (Optional).
7. Remote control serial connector.
8. Pump cable (5m long).
4
Meaning of the "WEEE" logo found in labels
The following symbol is applied in accordance with the
EC WEEE (Waste Electrical and Electronic Equipment)
Directive.
This symbol (valid only in countries of the European
Community) indicates that the product it applies to
must NOT be disposed of together with ordinary
domestic or industrial waste but must be sent to a
differentiated waste collection system.
The end user is therefore invited to contact the supplier
of the device, whether the Parent Company or a
retailer, to initiate the collection and disposal process
after checking the contractual terms and conditions of
sale.
67
INSTRUCTIONS FOR USE
DISPOSAL
87-900-986-01 (C)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

969-8988969-8989969-8990

Tabla de contenido