Würth 5707 010 Serie Traducción Del Manual De Instrucciones De Servicio Original página 17

Keep the mains lead away from
k)
rotating attachments.
Never put the electric tool down before
l)
the attachment has come to a complete
standstill.
tool.
Do not allow the electric tool to run
m)
while you are carrying it. Your clothing
Clean the ventilation slots of your
n)
electric tool at regular intervals.
Do not use the electrical tool in the
o)
Do not use any attachments that require
p)
liquid coolants. The use of water or other
Recoil and corresponding safety
instructions
Special safety instructions
a)
your body and arms into a position in
which you can absorb the recoil forces.
Always use the auxiliary handle, if
possible control over recoil forces or
reaction moments during starting.
b)
attachment.
Keep your body out of the area in which
c)
-
the electric tool will move in the event
of a recoil.
d)
vicinity of corners and sharp edges, etc.
Prevent attachments from rebounding
from the workpiece and jamming. The
This causes a loss of control or recoil.
e)
blade with teeth.
cause a recoil or the loss of control over the
electric tool.
Special safety precautions for
grinding and abrasive cut-off
operations:
a)
approved for your electric tool and the
safety hoods intended for these grinding
wheels.
b)
attached so that the grinding surface is
located beneath the safety guard. An
-
Never put your hands near a rotating
Work particularly carefully in the
Do not use a chain saw blade or saw
Use only grinding wheels that are
17