Concealed Duct High Static Pressure
5
7
11
UNIT No. display
Displays the number of the indoor unit selected.
Also displays error code of indoor and outdoor units.
12
Central control display
Displayed when the air conditioner is used under the
central control in combination with a central control
remote controller.
In case the remote controller is disabled by the central
control system,
The button operation is not accepted.
Even when you push ON/OFF, MODE, or TEMP.
button, and the button operation is not accepted.
(Settings made by the remote controller vary with the
central control mode. For details, refer to the Owner's
Manual of the central control remote controller.)
9-EN
3
1
2
6
flashes.
12
4
8
13
Remote controller sensor display
Displayed while the sensor of the remote controller is
used.
14
Pre-heat display
Displayed when the heating mode is energized or
defrost cycle is initiated.
While this icon is displayed, the indoor fan stops.
15
No function display
Displayed when the function requested is not available
on that model.
– 9 –
Owner's Manual
11
10
9
13
15
14