Haier HDC1804TW Manual Del Usuario página 18

11. At the end of the cycle, the dishwasher will stop, the program light
will stop flashing and the dishwasher will beep for several seconds.
Then, the cycle light will go out. The power light will stay on until the
power (ON/OFF) button is switched to the OFF position.
NOTE: The dishwasher is designed to stop if the door is opened
accidentally during washing.
12. If you need to disrupt operation, press the PAUSE button and the unit
will stop operation at that point in the cycle. To resume operation,
make sure the door is securely closed and the press the PAUSE button
again.
Pause is also used if the faucet water supply is needed for other purposes
during the washing cycle.
WARNING: To avoid leaks, DO NOT open the door when the
dishwasher is running. Even after pushing the PAUSE button to
interrupt operation, DO NOT open the door immediately because
the moist hot area remaining in the tub may cause harm. Waiting a few
seconds allows cold air to expand slowly inside the dishwasher's interior
compartment.
13. After washing, dishes should be allowed to cool down and continue
the drying process for about 10 minutes so that they are not to hot to
handle. Dishes will cool quicker if the door is opened slightly.
WARNING!: Do Not open the dishwasher door immediately because
the moist hot air remaining inside the chamber may cause harm.
Keep children away from the machine when the door is left open to dry
the dishware.
English
17