Cleaning And Maintenance - Philips Click&Style YS534/20 Manual Del Usuario

EngliSh
14
grooming
1 If a trimming comb is still attached, remove it.
2 Press the on/off button to switch on the appliance.
3 Place the body groomer on the skin.
4 Move the appliance against the direction of hair growth with one
hand, while you stretch the skin with the other hand.
Make sure that the body groomer is always fully in contact with the skin.

cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the shaver and its accessories.
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burned.
Note: To prevent inflammation of your skin, you should clean the appliance
thoroughly on a regular basis.
- Clean the appliance and the attachments after every use to prevent
pollution of the shaver and blockages.
- You can clean the outside of the appliance with a damp cloth. Do not
clean an attachment with a cloth.
cleaning the shaving attachment
- Clean the shaving heads frequently with Philips Shaving Head
Cleaning Spray (HQ110) for optimal shaving performance.
1 Switch off the appliance.
2 Press the release buttons on the shaving attachment (1) and pull
the shaving unit off the shaving attachment (2) (Fig. 22).
3 To unlock the orange retaining ring, turn it in the direction of the
arrows indicated in and on the retaining ring (Fig. 23).
4 Lift the retaining ring out of the shaving head holder. (Fig. 24)
5 Remove one cutter and its shaving guard (Fig. 25).