3M SEALED-BLOK 3400944 Manual Del Usuario página 7

WARNING: This product is part of a personal fall arrest or rescue system. The user must follow the
manufacturer's instructions for each component of the system. These instructions must be provided to the
user of this equipment. The user must read and understand these instructions before using this equipment.
Manufacturer's instructions must be followed for proper use and maintenance of this equipment. Alterations or
misuse of this product or failure to follow instructions may result in serious injury or death.
IMPORTANT: If you have questions on the use, care, or suitability of this equipment for your application,
contact Capital Safety.
IMPORTANT: Before using this equipment, record the product identifi cation information from the ID label in
the 'Inspection and Maintenance Log' at the back of this manual.
DESCRIPTION:
Figure 2 identifi es key components of the Sealed-Blok™ Self-Retracting Lanyards (SRLs). The Sealed-Blok SRLs
covered in this Instruction Manual are replaceable Fast-Line™ Wire Rope Lifelines (A) which retract into a sealed
aluminum Housing (B). They hang from overhead anchorage by a Carabiner attached through the Anchorage
Handle (C) on the top of the SRL. A Self-Locking Snap Hook (D) on the end of the Lifeline attaches to the
designated Fall Arrest connection on a Full Body Harness. A Bumper (E), equipped with an i-Safe RFID Tag,
protects the Wire Rope and Ferrules securing the Snap Hook from abrasion and corrosion. Sealed-Blok SRL models
may also include RSQ Dual-Mode Rescue/Descent and/or 3-Way Emergency Retrieval options (see Figure 1):
• SEALED-BLOK™ RSQ™ SRL MODELS: Sealed-Blok RSQ SRLs meet EN341 Class D requirements for Rescue
Descender Devices. They are equipped with an RSQ Rescue/Descent Knob (F) for automatic or assisted Rescue
Descent.
• SEALED-BLOK™ 3-WAY EMERGENCY RETRIEVAL SRL-R MODELS: Sealed-Blok Retrieval SRLs meet
EN1496 Class B requirements for Rescue Lifting Devices. They are equipped with a Rescue Hand Crank (G)
and Tripod Mounting Bracket (H) for Confi ned Space Entry and Rescue Retrieval.
FAST-Line Cable Replacement: Owners of FAST-Line Sealed Blok SRLs with a date of manufacture after January 4, 2015
are no longer required to send their Fast-Line SRLs back to Capital Safety for recertifi cation in the event of a fall or if the
impact indicator indicates the hook is in need of replacement. Simply replace the cable and hook via FAST-Line in accordance
with the FAST-Line Service Manual (5903076) and complete the Competent Person inspection.
Fast-Line Lifeline Description
3900105 15 m (50 ft) of 3/16 in. (4.76 mm) galvanized wire rope, self locking plated steel swiveling snap hook with indicator .
3900106 15 m (50 ft) of 3/16 in. (4.76 mm) stainless wire rope, self locking plated steel swiveling snap hook with indicator .
3900107 15 m (50 ft) of 3/16 in. (4.76 mm) stainless wire rope, self locking stainless steel swiveling snap hook with indicator .
3900108 26 m (85 ft) of 3/16 in. (4.76 mm) galvanized wire rope, self locking plated steel swiveling snap hook with indicator .
3900109 26 m (85 ft) of 3/16 in. (4.76 mm) stainless wire rope, self locking plated steel swiveling snap hook with indicator .
3900111 26 m (85 ft) of 3/16 in. (4.76 mm) stainless wire rope, self locking stainless steel swiveling snap hook with indicator .
3900112 40 m (130 ft) of 3/16 in. (4.76 mm) galvanized wire rope, self locking plated steel swiveling snap hook with indicator .
3900113 40 m (130 ft) of 3/16 in. (4.76 mm) stainless wire rope, self locking plated steel swiveling snap hook with indicator .
3900114 40 m (130 ft) of 3/16 in. (4.76 mm) stainless wire rope, self locking stainless steel swiveling snap hook with indicator .
3900168 53 m (175 ft) of 3/16 in. (4.76 mm) galvanized wire rope, self locking plated steel swiveling snap hook with indicator .
3900169 53 m (175 ft) of 3/16 in. (4.76 mm) stainless wire rope, self locking plated steel swiveling snap hook with indicator .
3900170 53 m (175 ft) of 3/16 in. (4.76 mm) stainless wire rope, self locking stainless steel swiveling snap hook with indicator .
Hook Description
2000180 Swiveling Self-Locking Snap Hook with Impact Indicator
2000181 Swiveling Self-Locking Snap Hook with Impact Indicator
Wire Rope Lifeline Tensile Strength:
Maximum Arrest Force:
Average Arrest Force:
Maximum Arrest Distance:
Average Locking Speed:
RSQ Descent Speed Range:
Table 1 – Specifi cations
Material
Alloy Steel
Stainless Steel
Galvanized Steel - Min. Tensile Strength 18.7 kN (4,200 lbs)
Stainless Steel - Min. Tensile Strength 16.0 kN (3,600 lbs)
6 kN (1,350 lbs)
4 kN (900 lbs)
1.1 m (42 in)
1.4 m/s (4.5 ft/s)
0.6-0.9 m/s (2-3 ft/s)
7
Gate Strength Throat Size
16 kN (3,600 lbs) 1.9 cm (3/4 in)
16 kN (3,600 lbs) 1.9 cm (3/4 in)
EN
Hook
2000180
2000180
2000181
2000180
2000180
2000181
2000180
2000180
2000181
2000180
2000180
2000181