Feature Identification - Tripp-Lite APS Serie El Manual Del Propietario

Feature Identification

Identify the premium features on your specific model and quickly locate instructions on how to maximize their use.
1
Configuration DIP Switches: Optimize Inverter/Charger
operation depending on your application. See Configuration
section for setting instructions.
2
Operating Mode Switch: Controls Inverter/Charger operation.
The "AUTO/REMOTE" setting ensures your equipment
receives constant, uninterrupted AC power. It also enables the
Inverter/Charger to be remotely monitored and controlled with
an optional remote module (Tripp Lite model APSRM4, sold
separately). The "CHARGE ONLY" setting allows your batteries
to return to full charge faster by turning the inverter off which
halts battery discharging. Setting the Operating Mode Switch
to the "DC OFF" (center) position will de-energize the unit and
connect "AC OUT" to "AC IN." See Operation section for setting
instructions.
3 "LINE", "INVERT", "LOAD" LEDs: Intuitive "traffic light"
signals show whether the Inverter/Charger is operating from AC
line power or DC battery power. It also warns you if the
connected equipment load is too high. See Operation section
for instructions on reading the indicator lights.
4 "BATT VOLTAGE" LEDs: These three lights will turn on in
several sequences to show approximate battery level. See
Operation section for instructions on reading the indicator
lights.
5 DC Power Terminals: Connect to your battery terminals. See
Battery Connection section for instructions.
6 Hardwire AC Input/Output Terminals: Securely connect the
Inverter/Charger to vehicle or facility electrical system input
and output. See AC Input/Output Connection section for
instructions.
13
10 14 1
5
3
7
Resettable Circuit Breakers: Protect your Inverter/Charger
against damage due to overload or charger failure. See
Operation section for resetting instructions.
8
Remote Control Module Connector: Allows remote
monitoring and control with an optional module (Tripp Lite
model APSRM4, sold separately). See remote module owner's
manual for connection instructions.
9
Battery Charge Conserver (Load Sense) Dial: Conserves
battery power by setting the low-load level at which the
Inverter/Charger's inverter automatically shuts off. See
Configuration section for setting instructions.
10 Multi-Speed Cooling Fan: Quiet, efficient fan prolongs
equipment service life.
11
Hardwire AC Input/Output Cover Plate
12 Battery Temperature Sensing Connector (side mounted,
not shown): Prolongs battery life by adjusting charge based on
battery temperature. Use with included cables (select models).
See Configuration section for details.
13
DC Power Terminal Cover Plate
14 Automatic Voltage Regulation (AVR) LEDs: (VR models only)
These lights will turn on as the Inverter/Charger automatically
corrects high or low AC line voltage without draining the battery.
4 8 3 2 9
6
12
7
11