Festo CPX−2A Serie Manual De Instrucciones página 20

3.2 Fitting
When dismantling the sub−base or replacing the electronic
module:
It is not necessary to remove the plugs and cables con
nected to the sub−base.
Removing the I/O module:
1. Remove the screws and carefully lift up the sub−base.
2. If required: Pull the electronic module carefully away
from the contact rails.
1
screws,
Tightening torque
0.9...1.1 Nm
2
Sub−base
3
Electrical
plug connector
4
Electronic module
5
Contact rails
6
Manifold base
20 Festo CPX−AX 0503a English
1
2
3
4
5
6