Specified Conditions Of Use; Cordless-Chain Saw - IKRA ITHK 1000 Instrucciones De Manejo

source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on
the switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If dust extraction/collection devices are provided
make sure that they are connected and used
properly. The use of a dust extraction device may
reduce risks caused by dust.
4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
SPECIFIED CONDITIONS OF USE
Safety Instructions Hedge trimmer
Keep all parts of the body in safe distance from the
knife.Do not try to remove the material being cut or
hold material to be cut when the knife is running.
Jammed cuttings to be removed only when the
machine is off and the battery taken out. A moment of
inattention when using the hedge trimmer may result in
serious injuries.
Carry the hedge trimmer by the handle when the
knife is off. Fit the protective cover whenever the
hedge trimmer is to be transported or stored. Careful
treatment with the appliance reduces the risk of injury by
the blade. Hold the power tools by the insulated handles
as the cutting knife may come into contact with hidden
cables/lines. Contact of the cutting knife with a live con-
tool's operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
c) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
e) Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
6) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
ductor may bring the metal parts of the appliance under
voltage and cause electric shock.
FURTHER SAFETY INSTRUCTIONS
Before work, check the area for any hidden
items such as wire fences.
When working, keep the appliance firmly with
both hands and with a distance from your
body.

Cordless-Chain saw

• Keep all parts of the body away from the saw chain
when the chain saw is operating. Before you start the
chain saw, make sure the saw chain is not contacting
GB ENGLISH
31