SMA Sunny Tripower 8000TL Instrucciones Para La Sustitución página 18

6 Removing the DC Assembly
• Pull out the cables with cable glands
downwards.
5. Remove the ESS pin connector. To do so, loosen the
clamping clip of the ESS pin connector using a flat-
blade screwdriver and pull out the ESS pin
connector.
6. Remove the marked connecting screws on the
assembly of the EMC filtering device (TX20).
7. Remove the assembly of the EMC filtering device
from the fixing domes and pull out. Tip: Use a socket
wrench (AF 4) to unlock the fixing domes.
18 DCCON-STPTL10-RM-xx-10
SMA Solar Technology AG
Replacement Manual