External Component Operations; Playing An External Component - JVC 3040641 Manual De Instrucciones

EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See "To select the external component to
use – EXT IN" on page 17.)
1
Select the external component
(LINE IN).
TAPE
• If "LINE IN" does not appear on the display, see
page 17 and select the external input ("LINE IN").
• Displayed only when one of the following
sources is selected – FM, AM and TAPE.
Note on One-Touch Operation:
When you press TAPE CD-CH, the power
automatically comes on. You do not have to press
to turn on the power.
24
TAPE LINE IN
(or CD)
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See pages 13 – 14.)