Selecting The Spectrum Analyzer (Sa); Connecting Auxiliary Audio Equipment - Sony CDX-M630 Manual De Instrucciones

Ocultar thumbs Ver también para CDX-M630:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Selecting the spectrum
analyzer (SA)
The sound signal level is displayed on a spectrum
analyzer. You can select a display for 9 patterns
(1 to 9), Auto, or "off."
1
Press (SOURCE) to select a desired
source.
2
Press (MENU).
3
Press M or m repeatedly until "SA"
appears.
4
Press < or , repeatedly to select the
desired setting.
5
Press (ENTER).
Connecting auxiliary audio
equipment
The unit's AUX IN (external audio input)
terminal on this unit is also used as the BUS
AUDIO IN (audio input) terminal.
You can listen to the sound from your car
speakers by connecting optional Sony portable
devices.
Note
If you connect an optional Sony CD/MD unit, you
cannot connect any portable devices and "AUX" will
not appear in the display as a source.
Selecting auxiliary equipment
Press (SOURCE) repeatedly to select
"AUX."
Adjusting the volume level
You can adjust the volume for each connected
audio equipment.
1
Press (MENU).
2
Press M or m repeatedly to select
"AUX Level."
3
Press (ENTER).
4
Press M or m repeatedly to select a
desired volume level.
The volume level is adjustable in 1 dB steps
from –6 dB to +6 dB.
5
Press (ENTER).
To deactivate auxiliary equipment in
the music source display
1
Press (OFF).
CD playback or radio reception stops.
2
Press (MENU).
3
Press M or m repeatedly until "AUX-A
on" appears.
4
Press , to select "AUX-A off."
5
Press (MENU).
To restore the indication, select "AUX-A on."
21

Publicidad

Tabla de contenido
loading

Tabla de contenido