Kohler K–2441 Guia De Inicio Rapido página 3

Remove the Weight
Base
Weight
Screw
1. Remove the Weight
Remove the two screws from the underside of the weight.
Slide the weight off of the base.
2. Fix-Mount the Mirror
NOTE: The maximum mounting surface thickness is 1-1/2" (3.8 cm).
Using a 2-1/2" hole saw, cut a hole at the desired location on the
mounting surface.
Remove any debris created from the cutting process.
Insert and tighten the threaded rods into the base.
Insert the base through the hole in the mounting surface.
From underneath the mounting surface, slide a bracket onto each
threaded rod, then secure each bracket with a nut.
Kohler Co.
Fix-Mount the Mirror
Base
Threaded
Rod
2-1/2"
(6.4 cm) D.
Bracket
Nut
3
1-1/2"
(3.8 cm) Max
1059736–2–A