Pioneer DEH-3900BT Manual De Instrucciones página 9

The phone call starts.
To answer an incoming call
1
Press when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one
phone is being used for a call, a message will appear in the display. To answer that incoming call, you
need to end the existing call.
Basic operations
Purpose Operation
End a call Press
Reject an incoming call Press and hold
Switch between the current caller Press the M.C. dial.
and a caller on hold
Cancel a caller on hold Press and hold
Adjust the volume of the caller's Turn the M.C. dial during the call.
voice (When private mode is on,
this function is not available.)
Turn the private mode on or off Press BAND/
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (1/
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/
then press the M.C. dial.
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice recognition is
connected to the unit via Bluetooth.
1
Press and hold to activate the voice recognition mode.
2
Press the M.C. dial and then talk into the microphone to input voice commands.
To exit the voice recognition mode, press BAND/
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
.
when a call is received.
.
during the call.
to 6/ ).
to 6/
.
Phone menu
Menu Item Description
RECENTS Display the missed call history.
[MISSED]
[DIALLED] Display the dialed call history.
[RECEIVED] Display the received call history.
PHONE BOOK*1 Display the contacts which have been transferred from your
phone. Set [VISIBLE] in the Bluetooth settings to [ON] to browse
the contacts via this unit.
PRESET 1-6 Recall the preset phone numbers. You can also recall the preset
phone numbers by pressing one of the number buttons (1/
to 6/
A.ANSR*2 Select [ON] to answer an incoming call automatically.
[ON], [OFF]
R.TONE Select [ON] if the ring tone does not come out from the car
speakers. Depending on the connected phone, this function
[ON], [OFF]
may not work.
PB INVT Invert the order of names in the phone book (name view).
PB A.SYNC Select whether or not to transfer the contacts from your phone
automatically when your phone is connected to the unit.
[ON], [OFF]
• When connected for the first time, the contacts from your
phone are transferred automatically, regardless of the [PB
A.SYNC] setting.
• If you switch from [ON] to [OFF], the auto synchronization will
not be performed on the next connection.
• If you switch from [OFF] to [ON], the auto synchronization will
be performed when your phone is connected to the unit.
• During the auto synchronization, you cannot cancel the
),
synchronization, even if you select [OFF].
BT SETTING You can adjust various settings for Bluetooth connections. For
details on Bluetooth settings, see page 8.
*1 The contacts on your phone will normally be transferred automatically when the phone is
connected. If they are not, use your phone to transfer the contacts.
*2 If two phones are connected, this function does not work on incoming calls that are received while
one of the phones is being used for a call.
).
9
En