Tabla de contenido
Publicidad
DJI RS 2 Quick Start Guide
2. Attach the Lower Quick-Release Plate and Lens-Fastening Strap
Toggle the lever on the lower quick-release plate to the unlocked position
the camera
and toggle the lever to the locked position
2
lens-fastening strap to the lower quick-release plate
lens
. Note that the rubber of the lens-fastening strap must be directly under the lens.
5
It is recommended to use the lens-fastening strap when using a long or heavy lens, and
always use the lens-fastening strap before enabling SuperSmooth mode.
To remove the camera from the lower quick-release plate, toggle the lever to the unlocked
position and remove the camera while pressing the safety lock beside the lever.
Safety Lock
3. Attach the Camera to the Gimbal
Toggle the lever on the camera mounting plate to the unlocked position
lower quick-release plate
roughly balanced
3
1
©
6
2020 DJI OSMO All Rights Reserved.
1
. Toggle the lever to the locked position once the camera is
2
.
2
after it is engaged. Attach the
3
, and bind the strap to the camera
4
2
3
3
, then insert
1
5
4
and insert the
1
Publicidad
Tabla de contenido
