Tabla de contenido
Publicidad
DJI RS 2 Quick Start Guide
2. Balancing Depth for the Tilt Axis
a. Rotate the tilt axis so that the camera lens is pointing forward. Toggle the lever to the
unlocked position
b. Check to make sure the camera is not front or back-heavy. If front-heavy, move the
camera backward by turning the knob
c. Toggle the lever to the locked position. The tilt axis is balanced when the camera is
steady while tilted up or down by 45°.
d. Lock the tilt axis.
3. Balancing the Roll Axis
a. Unlock the roll axis. Toggle the lever on the roll arm to the unlocked position
b. Check the direction in which the roll motor swings. If the camera rotates to the left,
move the camera to the right
to the left
.
2
c. Toggle the lever on the roll arm to the locked position. The roll axis is balanced when
the camera is steady.
d. Lock the roll axis.
©
8
2020 DJI OSMO All Rights Reserved.
.
1
2
1
2
3
. If the camera rotates to the right, move the camera
2
1
. If back-heavy, move the camera forward.
2
.
1
Publicidad
Tabla de contenido
